Through The Wall Mailbox Outdoor Stainless Steel Postbox Adjustable Depth

Description

The BETA Telescopic mailbox is a
Through The Wall Mailbox
. Its
depth can be adjusted
to the width of the wall upon installation.
This model can be applied into walls and fence collumns with
20-31 cm of width.
It's a two sided mailbox.
Height: 400 mm
Width: 277 mm
Depth: 200-310 mm
Weight: 5,2 kg
The door opens to the side. Its default is a right hand reverse door. The direction can be switched if requested.
Inside the box a brace prevents mails from falling out upon opening the door.
The two sided mailbox provides mail security with only a slot to the street side and a lockable door to the garden/yard side.
On the slot a tilting door prevents rain to get to the mails.
Up to A4 sized envelopes can be fitted through the slot.
Installing Instructions:
1. Widen the 'C' holes on both sides of the box that a polyurethane foam tube can access the space behind.
2. Place the mailbox into the installation hole in he wall.
3. Loosen the screws inside the 'B' body, then adjust the depth of the mailbox to the width of the wall.
4. The frontboard and the door on the backboard must be in level with the face of the wall on both sides. The frontboard and the backboard must not hang out of the level of the wall.
5. Fix the depth of the mailbox by tightening the screws inside box.
6. Wedge in the mailbox.
7. Use non-expanding polyurethane foam.
8. Fill the space between the wall and mailbox with the polyurethane foam through the 'C' holes.
9. Remove the the protective foil from the stainless surfaces.